Home/Pressure/Pascal to PSI

Pascal to PSI

Professional Pa to psi conversion.

Pascal
The SI derived unit of pressure, equal to one newton per square meter.
PSI
Pounds per square inch, the standard pressure unit in the US and UK.
Quick LinksLogic & FormulaFAQ
0.00014504
Unit
  • Attopascal
    aPa
  • Femtopascal
    fPa
  • Picopascal
    pPa
  • Nanopascal
    nPa
  • Micropascal
    µPa
  • Millipascal
    mPa
  • Centipascal
    cPa
  • Decipascal
    dPa
  • Dyne per square centimeter
    dyn/cm²
  • Microbar
    µbar
  • Newton per square meter
    N/m²
  • Pascal
    Pa
  • Poundal per square foot
    pdl/ft²
  • Millimeter of water (4°C)
    mmH₂O
  • Kilogram-force per square meter
    kgf/m²
  • Dekapascal
    daPa
  • Pounds per square foot
    psf
  • Pound-force per square foot
    lbf/ft²
  • Centimeter of water (4°C)
    cmH₂O
  • Gram-force per square centimeter
    gf/cm²
  • Hectopascal
    hPa
  • Millibar
    mbar
  • Millimeter of mercury (0°C)
    mmHg (0°C)
  • Torr
    Torr
  • Millimeter of mercury
    mmHg
  • Inch of water (60°F)
    inAq (60°F)
  • Inch of water (4°C)
    inAq (4°C)
  • Kilonewton per square meter
    kN/m²
  • Kilopascal
    kPa
  • Centimeter of mercury (0°C)
    cmHg
  • Foot of water (60°F)
    ftAq (60°F)
  • Foot of water (4°C)
    ftAq (4°C)
  • Inch of mercury (60°F)
    inHg (60°F)
  • Inch of mercury
    inHg
  • PSI
    psi
  • Pound-force per square inch
    lbf/in²
  • Newton per square centimeter
    N/cm²
  • Ton-force (short) per square foot
    tonf/ft²
  • Kilogram-force per square centimeter
    kgf/cm²
  • Technical atmosphere
    at
  • Bar
    bar
  • Atmosphere
    atm
  • Ton-force (long) per square foot
    long tonf/ft²
  • Megapascal
    MPa
  • Newton per square millimeter
    N/mm²
  • Kip-force per square inch
    kipf/in²
  • KSI
    ksi
  • Kilogram-force per square millimeter
    kgf/mm²
  • Ton-force (short) per square inch
    tonf/in²
  • Ton-force (long) per square inch
    long tonf/in²
  • Gigapascal
    GPa
  • Terapascal
    TPa
  • Petapascal
    PPa
  • Exapascal
    EPa
Unit
  • Attopascal
    aPa
  • Femtopascal
    fPa
  • Picopascal
    pPa
  • Nanopascal
    nPa
  • Micropascal
    µPa
  • Millipascal
    mPa
  • Centipascal
    cPa
  • Decipascal
    dPa
  • Dyne per square centimeter
    dyn/cm²
  • Microbar
    µbar
  • Newton per square meter
    N/m²
  • Pascal
    Pa
  • Poundal per square foot
    pdl/ft²
  • Millimeter of water (4°C)
    mmH₂O
  • Kilogram-force per square meter
    kgf/m²
  • Dekapascal
    daPa
  • Pounds per square foot
    psf
  • Pound-force per square foot
    lbf/ft²
  • Centimeter of water (4°C)
    cmH₂O
  • Gram-force per square centimeter
    gf/cm²
  • Hectopascal
    hPa
  • Millibar
    mbar
  • Millimeter of mercury (0°C)
    mmHg (0°C)
  • Torr
    Torr
  • Millimeter of mercury
    mmHg
  • Inch of water (60°F)
    inAq (60°F)
  • Inch of water (4°C)
    inAq (4°C)
  • Kilonewton per square meter
    kN/m²
  • Kilopascal
    kPa
  • Centimeter of mercury (0°C)
    cmHg
  • Foot of water (60°F)
    ftAq (60°F)
  • Foot of water (4°C)
    ftAq (4°C)
  • Inch of mercury (60°F)
    inHg (60°F)
  • Inch of mercury
    inHg
  • PSI
    psi
  • Pound-force per square inch
    lbf/in²
  • Newton per square centimeter
    N/cm²
  • Ton-force (short) per square foot
    tonf/ft²
  • Kilogram-force per square centimeter
    kgf/cm²
  • Technical atmosphere
    at
  • Bar
    bar
  • Atmosphere
    atm
  • Ton-force (long) per square foot
    long tonf/ft²
  • Megapascal
    MPa
  • Newton per square millimeter
    N/mm²
  • Kip-force per square inch
    kipf/in²
  • KSI
    ksi
  • Kilogram-force per square millimeter
    kgf/mm²
  • Ton-force (short) per square inch
    tonf/in²
  • Ton-force (long) per square inch
    long tonf/in²
  • Gigapascal
    GPa
  • Terapascal
    TPa
  • Petapascal
    PPa
  • Exapascal
    EPa
Precision: 8 decimal places

Logic & Formula

To convert Pascal to PSI, we use the specific conversion ratio for this category. 1 Pa is equal to 0.00014504 psi.

Value in psi = (Value in Pa * 1) / 6894.75729

Unit Definitions

Pascal

The SI derived unit of pressure, equal to one newton per square meter.

PSI

Pounds per square inch, the standard pressure unit in the US and UK.

Verified 2026 Standards
Industrial Precision

How to convert Pascal to PSI?

Enter the value in Pascal, choose the target unit PSI, and the result updates instantly. This page also includes the conversion formula and a quick reference table for verification.

Formula: Value in psi = Value in Pa × 0.00014504

Common Conversions Table

Value (Pa)Result (psi)
10.00014504
100.00145038
250.00362594
500.00725189
1000.01450377
10000.14503774

FAQ

What is the conversion formula from Pa to psi?
Value in psi = Value in Pa × 0.00014504
What is the smallest unit in Pressure?
The smallest unit (as defined on this site) is: Attopascal (aPa). For higher precision, convert using a smaller unit first.
Are the results accurate?
Yes. Conversions run locally in your browser using verified ratios and display up to 8 decimals. Some categories like temperature and fuel use specialized formulas.

About this conversion

This page converts Pascal to PSI using verified ratios and includes tables, examples, and FAQs for quick verification.

Pascal
The SI derived unit of pressure, equal to one newton per square meter.
PSI
Pounds per square inch, the standard pressure unit in the US and UK.

Formula and precision

Value in psi = Value in Pa × 0.00014504
1 Pa is equal to 0.00014504 psi.
Yes. Conversions run locally in your browser using verified ratios and display up to 8 decimals. Some categories like temperature and fuel use specialized formulas.
  • Use smaller units for higher precision, then convert back if needed.
  • Temperature and fuel categories can’t be reduced to one constant multiplier.
  • Symbols vary by region (US/UK gallons, metric vs. imperial abbreviations).
  • For engineering work, validate with a second reference and keep unit symbols.

Quick examples

Example: 1 Pa = 0.00014504 psi.

Value (Pa)Result (psi)
10.00014504
12.50.00181297
500.00725189
1000.01450377

Common mistakes and definitions

Pressure is often reported as absolute or gauge. Make sure your source values use the same reference before converting (especially in HVAC and engineering specs).
  • Confusing absolute pressure with gauge pressure.
  • Dropping prefixes (Pa vs kPa vs MPa) while comparing values.
  • Rounding too early before converting between small units.

Common Conversions Table

Pascal (Pa)PSI (psi)
10.00014504
20.00029008
30.00043511
50.00072519
100.00145038
250.00362594
500.00725189
1000.01450377
2500.03625943
5000.07251887
10000.14503774

Category facts

Smallest unit (on this site)
Attopascal (aPa)
Largest unit (on this site)
Exapascal (EPa)

Popular conversions

Back to Pressure category Browse more related converters below.

Pascal → PSIBar → PSIPascal → KilopascalAtmosphere → BarTorr → PascalPSI → BarPascal → AttopascalPascal → Millimeter of water (4°C)

Related conversions

Convert Pascal to:
Newton per square meterPoundal per square footKilogram-force per square meterDekapascalDecipascalMicrobarDyne per square centimeterPounds per square foot
Convert to PSI from:
Pound-force per square inchNewton per square centimeterInch of mercuryInch of mercury (60°F)Foot of water (4°C)Foot of water (60°F)Centimeter of mercury (0°C)Kilopascal

FAQ

How to convert Pascal to PSI?
Enter the value in Pascal, choose the target unit PSI, and the result updates instantly. This page also includes the conversion formula and a quick reference table for verification.
What is the conversion formula from Pa to psi?
Value in psi = Value in Pa × 0.00014504
What is the smallest unit in Pressure?
The smallest unit (as defined on this site) is: Attopascal (aPa). For higher precision, convert using a smaller unit first.
Why can results differ between websites?
Different standards, rounding rules, and unit definitions can change results. This page shows the formula used for transparency.
Are the results accurate?
Yes. Conversions run locally in your browser using verified ratios and display up to 8 decimals. Some categories like temperature and fuel use specialized formulas.

More Related Pressure Tools

Back to Pressure category
Convert to KilopascalConvert to MegapascalConvert to BarConvert to MillibarConvert to PSIConvert to Pounds per square footConvert to AtmosphereConvert to TorrConvert to Millimeter of mercuryConvert to Inch of mercuryConvert to KSIConvert to Exapascal

People also convert

Bar → PSIPascal → KilopascalAtmosphere → BarTorr → PascalPSI → Bar

Did you know?

Engineering pressure units including PSI, Bar, and Atmospheres. Precision is the cornerstone of our platform. We utilize 15-digit floating-point arithmetic to ensure results meet 2026 industrial and academic verification standards. Looking for other types of calculations? Explore our Main Dashboard for 100,000+ precision permutations.